Application :

ECR-10K spray up roving is made of standard ECR-glass multi-end fiberglass. It's designed for use in polyester and vinyl ester resins spray up system, for producing consumer products, corrosion and construction applications. It's also used for filament winding process to make pipes and tanks.

Properties :

Outstanding process properties
1.Adopting high performance sizing, very low static, fuzz and fiber fly.
2.Excellent chopability,uniform glass dispersion and lay down properties.
3.Ease of rollout and air release, excellent mold conformance.
4.outstanding roving pay-out and package transfer.
5.Rapid wet-throgh,fast and complete wet-out.

High laminate properties

1.High laminate mechanical properties and wet strength retention.
2.For general polyester and vinyl ester resins,exhibit mechannical properties equal or better than E-glass roving.
3.Strong bonding between the glass fibers and the resin matrix due to the special designed sizing,the finished laminate has high wet strength retention because the laminate has high level resistance to hydrolytic attack.

Corrosion Resistance

1.The final product used ECR-10K has superior acid and strain corrosion resistance than E-glass.
2.ECR-10K is the preferred choice over E-glass for sewer GRP pipe and chemical resistance applications.
3.The long-term strength retention or ECR-10K is significantly higher.

Product Description

Typical Laminate Mechanical Properties

Product available

Package

CPIC's spray up roving is wrapped by shrinkage packing, then put into pallets or carton box.48 rolls or 64rolls each pallet,2 rolls per carton box, each roll weight 18kgs or 24kgs.
Carton box can't be stacked higher than 5 tiers, and pallet not higher than 2 tiers.

Storage :

If no special requirements, it should be stored in cool and dry place.
Don't open the package before using to prevent absorbing moisture.

Top